One EQ band has changed this sound. Drag the node to add a band that cancels it, and flip to Bypass until Your EQ sounds the same.
Undo the EQ by ear.
One EQ band has changed the sound. With a single band of your own, put it back: find the frequency, then set the gain that cancels it. It trains the whole EQ move at once, where and how much.
How it works
- Press Play and flip between Bypass and Problem.
- Drag your band to the frequency and set its gain (the width is fixed).
- Listen to Your EQ against Bypass, then check.
How it’s scored
How flat the changed sound and your band come out together, from 100 for a perfect undo to 0 for no better than leaving it. Pass with a 70 average over five challenges.
Levels
Six levels: undo a 12 dB boost, then on a drum kit, then a smaller 6 dB move on the kit, reaching down to 80 Hz, undo a cut, a boost or a cut in a full mix, and Subtle Surgery, 6 dB moves in the mix. It’s part of Mix Chops Pro, every level.
Step 4 of 7Next: Solo to ContextLearn: Parametric EQLearn: Critical listeningAll EQ exercisesDaily session