Custom EQ trainer
Short answer: this is a free EQ trainer you set up yourself, with two ways to train. Name the band: one band moves and you say which. Match the EQ: a hidden EQ is on the sound and you set yours to match it. No account, no levels, no limit.
The trainer is loading. It needs JavaScript and sound.
How to use it
Name the band
- Choose your bands. Start with three far apart. Add their neighbours when that gets easy.
- Press Play. Flip between Bypass and EQ until you hear what changed.
- Pick the band. The graph then shows the move, with what that band sounds like.
- Make it harder. When most are right, make the move smaller, switch to cuts, or play it on a song.
Match the EQ
- Choose the EQ’s shape. Start with one bell.
- Press Play. Target is the sound with the hidden EQ on it.
- Drag your band by its numbered handle until Yours sounds like Target. Flip between the two as you go.
- Press Check. You get a score, the target’s curve drawn with yours, and which way each band was off.
- Make it harder. Add bells, a shelf or a cut, hide the bells’ widths, or make the moves smaller.
Use headphones or decent speakers: laptop and phone speakers can’t play the low bands.
What you can set
Name the band
- Bands. Nine, an octave apart, from 63 Hz to 16 kHz. Any two or more.
- Move. Boosts, cuts, or both mixed. Cuts are harder to hear than boosts.
- Size. 12, 9, 6, 4 or 3 dB. Smaller is harder.
- Sound. Pink noise, a drum kit or a song. Pink noise is the easiest, because every band is equally loud in it.
Keys, once you’ve pressed Play: Space plays and stops, B flips Bypass and EQ, 1 to 9 pick a band, Enter goes to the next question.
Match the EQ
- Bells. One, two or three, kept apart so each can be told from the next.
- Low end and high end. Off, a shelf, or a cut filter.
- Bell width. Fixed at Q 1.4, about an octave wide, or hidden too, so you set the width as well.
- Move and size. Boosts, cuts or both. The size is the biggest move: each one is between half of it and all of it, and never under 3 dB.
- Sound. Pink noise, a drum kit or a song.
Keys, once you’ve pressed Play: Space plays and stops, B flips Target and Yours, Enter checks, then goes to the next EQ. Press a handle or pick a band, and the arrow keys then move it.
Questions
Is the EQ trainer free?
Yes. There is no account, no limit and nothing to install. It runs in your browser.
How is it different from Identify?
Identify is the scored version: twelve levels, in order, and it keeps your score. Here there are no levels: you choose what to practise, and nothing counts toward your progress.
How is Match the EQ scored?
From 0 to 100, by how close your curve is to the target’s. 100 is the same curve. 0 is no closer than leaving your EQ flat.
Which bands should I start with?
Three far apart: 125 Hz, 1 kHz and 8 kHz, as 12 dB boosts on pink noise. That is how Name the band opens.
Why can’t I hear 63 Hz or 16 kHz?
Small speakers can’t play 63 Hz, and hearing at 16 kHz fades with age. Use headphones, and leave out a band you can’t hear.
Does it save my score?
No. The count is for this sitting only. Your setup is remembered on this device. For progress kept from day to day, play the Daily Session.
Can I share a setup?
Yes. Press “Copy a link to this setup” and send the link. It opens the trainer in the same mode with the same setup.
What does it play?
Pink noise, drum kits and songs split into stems.
Identify: twelve levels, in order.
Name the band, from three bands on pink noise to a 4 dB move in a full mix. It keeps your score and explains each miss. The first two levels are free.
Play IdentifyFree, in your browser, no account