Free tool

Mix check

By Dan Murtagh · Updated

Drop in a mix. See how loud it is, what streaming will do to it, and how it holds up in mono.

The reading

ExamplePaper Weather0:58 · 48 kHz · Stereo
Loudness−14.1LUFS
True peak−0.1dBTP
Loudness range3.5LU
Peak to loudness14.0dB
  • True peak is over −1 dBTP, the limit most streaming services ask for. Lossy encoding can push peaks like that into distortion.
0:00 / 0:58

M momentary · S short-term · L R peak · the whole mix · the service’s level · the true-peak limit

On streaming

Spotify plays it as it is

It plays at −14.1 LUFS there, alongside everything else.

Master it to taste, loud and dense or open and dynamic. This is only what the service does after you upload.

The detail

Loudest 3 seconds
−12.0 LUFS, short-term
Loudest moment
−10.7 LUFS, momentary, 0.4 s
Sample peak
−0.2 dBFS
Clipped
None, full-scale samples in a row
DR
12, as a DR meter reads it

Spectrum

Amber is the whole mix, in third-octave bands, with its loudest band at 0 dB. Teal is the moment playing, with a line that holds its peaks. Pink noise would draw a level line.

Where the sound sits

Correlation+0.72 over the whole mix

Amber is the whole mix, each point a moment of it. Teal is now. Straight up is mono, and the two slanted lines are the left and right speakers alone. Anything lying flatter than those is left and right pulling against each other, which cancels in mono. Further out is louder: the rim is the mix’s peak, and the rings are 12 dB apart.

Correlation
+0.72, +1 mono, 0 wide, under 0 cancels
In mono
0.8 LU quieter, left and right summed
Under 120 Hz
+0.95, the low end’s correlation
Left and right
Left 0.2 dB louder
Sides
7.8 dB under the middle
Ask Dan about these numbers

An AI mentor built on Dan’s teaching. Free with an account: ten questions a day.

Full report

Train it

You’ve measured it. Now train your ears on it.

Your songs splits a song into its parts. You pick the bars, then balance, EQ and compress them by ear.

Train on your own song

Your songs is Pro · Try it free on our demo song

What the numbers mean

  • Loudness (LUFS, integrated): how loud the whole mix sounds, measured the way streaming services measure it. It’s the number they level by.
  • True peak (dBTP): the highest the signal reaches, between samples as well as on them. An ordinary peak meter misses the part in between.
  • Loudness range (LU): how far the loud sections sit above the quiet ones.
  • Peak to loudness (dB): true peak minus loudness. Heavier limiting makes it smaller.
  • DR: the peak against the loudest fifth of the mix, the way a DR meter reads it.
  • Correlation: how alike left and right are. +1 is mono, 0 is wide, and under 0 means parts cancel when the mix is summed to mono.

What streaming does to loudness

Short answer: streaming services play everything at about the same loudness. A louder master is turned down to it. A quieter one is turned up by Spotify and Apple Music, as far as its peaks allow, and left as it is by the others here.

Service or specLoudnessTrue peakQuiet masters
Spotify−14 LUFS−1 dBTPTurned up
Apple Music−16 LUFS−1 dBTPTurned up
YouTube−14 LUFS−1 dBTPLeft as they are
Tidal−14 LUFS−1 dBTPLeft as they are
Amazon Music−14 LUFS−2 dBTPLeft as they are
Deezer−15 LUFS−1 dBTPLeft as they are
Apple Podcasts−16 LUFS−1 dBTPSet it yourself
EBU R128 (broadcast, Europe)−23 LUFS−1 dBTPSet it yourself
ATSC A/85 (broadcast, US)−24 LUFS−2 dBTPSet it yourself

These are what the streaming services do after you upload. They aren’t a level you have to master to: if a song wants to be loud and dense, make it that way and the service turns it down. Podcasts and broadcast are different: those are levels you deliver to. For 50+ platforms, see my LUFS loudness standards.

How it measures

Your browser decodes the file and measures it on your device. Nothing is uploaded, and the readings aren’t sent anywhere.

  • Loudness follows ITU-R BS.1770 and EBU R128, the standard the services use: K-weighted and gated.
  • True peak is read at four times the sample rate, to catch what falls between the samples.
  • A mono file is measured as one channel, as the standard measures it.
  • An MP3 or M4A is measured as your browser decodes it, so its peaks can read a touch differently from one decoder to the next.

The meter is checked against ffmpeg’s EBU R128 meter. On our test mixes, loudness agrees to within 0.1 LU and true peak to within 0.1 dB.

Questions

What LUFS should my master be for Spotify?

Spotify plays music at −14 LUFS. A louder master is turned down to that, and a quieter one is turned up as far as its peaks allow. That’s what happens after you upload, not a level you have to hit. Master to what the song needs.

What is true peak, and why −1 dBTP?

True peak is the highest the signal reaches between samples as well as on them. Most services ask for −1 dBTP because turning a file into AAC, MP3 or Ogg can raise its peaks, and a peak pushed over full scale distorts.

What is LUFS?

Loudness units relative to full scale. It measures how loud audio sounds to a person, not how high its waveform peaks, and it’s what streaming services use to level one song against the next.

Is my mix uploaded?

No. Your browser decodes and measures the file on your own device. The audio never leaves it, and the readings aren’t sent anywhere.

What does the correlation reading tell me?

How a mix holds up in mono. Near +1, left and right are much the same. Near 0, the mix is wide. Under 0, left and right pull against each other, and those parts get quieter or vanish on a mono speaker.

Which files can it read?

WAV, FLAC, MP3 and M4A, up to 15 minutes and 400 MB. Safari reads AIFF as well.